Search
Products meeting the search criteria
0.91" OLED Display 128x32 (SSD1306)
A small, sharp OLED for status text and numbers, driven by the common SSD1306 library...
0.91" OLED Display Module I2C 128x32
Compact I2C OLED in white, blue or yellow for ESP32, microcontroller and single-board projects...
0.96" OLED Display 128x64 (SSD1306, I2C)
The popular 0.96-inch OLED with only four wires (I2C) - perfect for menus and sensor readings...
1000 uF 35 V Low-ESR Capacitors, 10 pcs
Low-ESR electrolytic capacitors for power supplies and motor circuits...
120 Dupont Jumper Wires, 20 cm
Three 40-wire ribbons (male-male, male-female, female-female) - separate them as you need...
18650 Battery Holder Box (Weld-Free)
Connect 18650 cells in series or parallel without welding - for robot and project power packs...
18650 Charger + Step-Up Board (5 V Out)
Charges a lithium cell and boosts it to 5 V - turns an 18650 into a small power bank for your projec..
2.4" SPI Touch Screen for Raspberry Pi Zero 2 W
A 320x240 touch display that sits right on the Zero 2 W - a small screen for a pocket computer or co..
22-in-1 Sensor Module Kit
Twenty-two plug-in modules for learning: soil moisture, sound, light, temperature and more, each on ..
4-Wheel Aluminium Robot Car Chassis
A sturdy aluminium car frame with four motors and wheels; add a microcontroller, a motor driver and ..
45-in-1 Sensor Module Kit
A big set of 45 sensor and output modules - a quick way to try many ideas without soldering...
45-in-1 Sensor Module Kit, Compact Box
Forty-five sensor modules in a smaller box at a lower price, for microcontroller and single-board-co..
4S / 6S LiPo Pack with XT60 (1100-1850 mAh)
High-discharge LiPo packs for FPV quads in common 4S and 6S sizes with XT60 plug...
4S LiPo Battery 14.8 V (1500-3300 mAh)
4S LiPo packs in several capacities for quads, planes and cars...
4WD Metal Robot Chassis with Ackermann Steering and Encoders
A metal chassis that steers like a real car and carries up to 5 kg; encoder motors let your code mea..
4WD Smart Robot Car Kit (Uno R3, Ultrasonic, Line Tracking, Bluetooth)
A complete robot car: Uno R3 compatible board, four motors, ultrasonic sensor, line-tracking and Blu..
4x TT Gear Motor 1:48, Dual Shaft (3-6 V)
Four TT gear motors (about 200 RPM) with shafts on both sides, e.g. for wheels and encoder discs...
4x TT Gear Motor with Wheels (3-6 V)
Four yellow TT gear motors with wheels - exactly what a two- or four-wheel robot car needs...
5 mm LED Assortment Kit
LEDs in red, green, blue, yellow and white for breadboard experiments and indicators...
8-Channel Relay Board for Raspberry Pi 5 / 4B
Eight relays with indicator LEDs as a HAT - switch lights, pumps and appliances from the Pi...
830-Piece Electronics Starter Kit
Breadboard, jumper wires, LEDs, resistors, buttons and many more basic parts in one box - the stock ..
830-Point Breadboard + 3.3/5 V Power Module
A full-size breadboard with a plug-on power module that gives 3.3 V and 5 V on the rails...
9 g Micro Servo (SG90 type, Plastic Gear)
The standard 9 g micro servo, 180 degrees, for robot arms, steering and small mechanisms...
A4988 / DRV8825 Stepper Driver with Heatsink
Stepstick stepper drivers with heatsinks, the plug-in type for RAMPS and CNC shields...























