Search
Products meeting the search criteria
1-Channel 5 V Relay Module, 5/10 pcs
Single relay modules with optocoupler - one per load you want to switch...
120 Dupont Jumper Wires, 20 cm
Three 40-wire ribbons (male-male, male-female, female-female) - separate them as you need...
18650 Battery Holder Box (Weld-Free)
Connect 18650 cells in series or parallel without welding - for robot and project power packs...
18650 Charger + Step-Up Board (5 V Out)
Charges a lithium cell and boosts it to 5 V - turns an 18650 into a small power bank for your projec..
2.4" SPI Touch Screen for Raspberry Pi Zero 2 W
A 320x240 touch display that sits right on the Zero 2 W - a small screen for a pocket computer or co..
2207 Brushless Motor Set for 5-inch Quads
Budget 2207 motors in 1750, 2450 and 2750 KV, sold single or in sets of four for 5-inch freestyle bu..
2207 PRO 6S FPV Motor
A 2207 motor for 6S freestyle quads with 5-inch props, in 1950 to 2100 KV...
4S / 6S LiPo Pack with XT60 (1100-1850 mAh)
High-discharge LiPo packs for FPV quads in common 4S and 6S sizes with XT60 plug...
4S LiPo Battery 14.8 V (1500-3300 mAh)
4S LiPo packs in several capacities for quads, planes and cars...
8-Channel Relay Board for Raspberry Pi 5 / 4B
Eight relays with indicator LEDs as a HAT - switch lights, pumps and appliances from the Pi...
830-Point Breadboard + 3.3/5 V Power Module
A full-size breadboard with a plug-on power module that gives 3.3 V and 5 V on the rails...
Active Cooler for Raspberry Pi 5 (PWM Fan)
Aluminium heatsink with a speed-controlled fan that plugs into the fan connector of the Pi 5 - keeps..
Aluminium Case for Raspberry Pi 5
A black metal case that protects the Pi 5 and helps cooling; room for the active cooler...
Debug Probe for Pico / RP2040
USB debug probe with SWD and UART for RP2040 boards - step through your code instead of guessing...
DHT22 / AM2302 Temperature and Humidity Sensor
Digital temperature and humidity sensor on a small board with cable - for weather stations and room ..
DHT22 Temperature and Humidity Module
AM2302 digital sensor module for accurate temperature and humidity readings in your projects...
Dupont Jumper Wire Kit (M-M, M-F, F-F)
Jumper wires in all three combinations and two lengths - for breadboards, modules and boards...
ESP32 DevKitC Board (ESP32-WROOM-32)
The standard ESP32 development board with WiFi and Bluetooth, two cores and plenty of pins. Works wi..
ESP32-C3 Zero Mini Board
A very small ESP32-C3 board with WiFi and Bluetooth that fits almost anywhere; programmable in the A..
ESP32-S3 AI Camera Board with Audio
ESP32-S3 board with camera, microphone and speaker output for small vision and voice projects...
ESP32-S3 Board with 3.5" Touch Display
An ESP32-S3 with a 320x480 capacitive touch screen on the same board - for control panels, small das..
F4 V3S Plus Flight Controller + 45A/60A 4-in-1 ESC Stack
Flight controller and 4-in-1 ESC as a matching stack - BetaFlight and INAV ready, the heart of a 5-i..
F60 Pro IV 2207 Racing Motor
A premium 2207 motor for racing and freestyle, available in several KV versions for 4S to 6S...
GTS V4 2207 1600KV Motor (up to 8S)
A 2207 motor for high-voltage 5-inch builds (up to 8S) - smooth and efficient for freestyle flying...























